Skip to content

HP Jet Fusion 3D 4200 3D Printer

The HP Jet Fusion 4200 3D Printer is 25 times faster than FDM with MJF technology. With its high measuring accuracy and high recycling rate, it restarts the 3D printer revolution by offering up to 50% cost per piece.

Hp Jet Fusion 3D 4200

The HP Jet Fusion 3D Printer represents a transformation into a production system beyond being a prototyping system. Therefore, the term 3D Production instead of 3D Printer for HP Jet Fusion will not be too exaggerated. Moreover, the advantages that come with voxiers will increase the appetite of end product producers.  HP Jet Fusion 3D 4200 3D Printer Turkey authorized dealer Poligon Engineering summarizes the issue in the rest of the page:

HP Jet Fusion 3D 4200 3D

What is this Voxel?

In 3D printing, a voxle represents a value on a normal grid in a three-dimensional area, such as a volumetric pixel. Each voxel contains volumetric information that will bring a product with the desired properties to life.

blueok

Precision and Consistency

Produce your most detailed mechanical and functional parts with incredible dimensional precision and consistency.

bluetime

Groundbreaking Speed

Up to 10 times faster speed slower, dropping 30 million drops per inch per inch in the workspace.

bluemoney

Lowest Cost Per Part

Reduce production cost per part by half with high recycling rate and appropriate material cost.

Accuracy and Consistency

HP Jet Fusion 3D printers, which offer a measurable precision stability and material quality far beyond their nearest competitor, can provide the following values with PA12 material: Measuring precision for a piece with dimensions between 5-100 mm +/-0.2 mm, +/-0.2% for a piece greater than 100, 0.5 mm, the smallest printable piece 0.10 mm / 6pt, provided that the smallest printable hole diameter is not less than 1 mm.

Groundbreaking Speed

Production is now much faster with the HP Jet Fusion 3D 3200/4200, which halves material costs 10 times faster than SLS and 25 times faster than FDM. The HP Jet Fusion 3D is capable of making cooling outside the construction unit, preventing the product from being produced, and continuously producing 24 hours a day with both faster cooling and construction.
HP Jet Fusion 3D 4200 3D

Lowest Cost Per Part​

Reduce total acquisition costs and produce quality parts with technical-grade multi-purpose thermoplastic PA12, which is now an industry-leading manufacturer of hazardous materials in the reuse of powders.

  • Improve cost and parts quality with a cost-effective material that delivers industry-leading reusability with HP MJF 3D.
  • Reuse the remaining powder in due course.
  • You don’t need to track dust history. Perform consistently with only 20% refresh rate.
  • Get a minimum dust waste between production cycles.

HP Jet Fusion 4200 3D Printer System

HP Jet Fusion 3D 4200 Printer
Printer performance
Technology
HP Multi Jet Fusion Technology
Effective building volume
380 x 284 x 380 mm (15 x 11.2 x 15 in)
Building speed
3200 Printer: 2800 cm3/hr (170 in3/hr)13 4200 Printer: 4000 cm3/hr (244 in3/hr)14
Layer thickness
3200 Printer: 0.08 mm (0.003 in) 4200 Printer: 0.07 to 0.08 mm (0.0027 to 0.0031 in)
Print resolution (x, y)
1200 dpi
Dimensions (w x d x h)
Printer
2210 x 1200 x 1448 mm (87 x 47 x 57 in)
Shipping
2300 x 1325 x 2068 mm (91 x 52 x 81 in)
Operating area
3700 x 3700 x 2500 mm (146 x 146 x 99 in)
Weight
Printer Build Unit
750 kg (1653 Ib) 140.5 kg (309.7 lb)
Shipping
945 kg (2083 Ib)
Network
Gigabit Ethernet (10/100/1000Base-T), supporting the following standards: TCP/IP, DHCP (IPv4 only), TLS/SSL
Hard disk
2 TB (AES-128 encrypted, FIPS 140, disk wipe DoD 5220M)
Software
Included software
HP SmartStream 3D Build Manager, HP SmartStream 3D Command Center
Supported file formats
3mf, stl
Certified third-party software
Autodesk® Netfabb® Engine for HP, Materialise Magics with Materialise Build Processor for HP Multi Jet Fusion, Siemens NX AM for HP Multi Jet Fusion
Power
Consumption
9 to 11 kW (typical)
Requirements
Input voltage three phase 380-415 V (line-to-line), 30 A max, 50/60 Hz / 200-240 V (line-to-line), 48 A max, 50/60Hz
Certification
Safety
IEC 60950-1+A1+A2 compliant; United States and Canada (UL listed); EU (LVD and MD compliant, EN60950-1, EN12100-1, EN60204-1, and EN1010)
Electromagnetic
Compliant with Class A requirements, including: USA (FCC rules), Canada (ICES), EU (EMC Directive), Australia (ACMA), New Zealand (RSM)
Environmental
REACH
Warranty & Service coverage included
One-year Limited hardware warranty