F123CR Series 3D Printers
F123 Series 3D printers give designers, engineers
and educators access to affordable, industrial-grade
3D printing. Work faster through concept iterations
and component verification. Make jigs, fixtures and
manufacturing tools faster, with strong, stiff materials.
Increase productivity and reach your goals sooner
with repeatable results.
The F123CR printer series consists of F190™ CR and F370®CR composite printers equipped with hardened components for working with composite materials. ABS-CF10 and FDM® Nylon-CF10 carbon fiber reinforced composite materials are available in both systems. These materials work with special printheads for longer life. In addition, up to six engineering grade thermoplastics are available for wider application versatility.. Hands-free soluble backing material allows extremely complex parts to be printed and hands-free post-processing
F190CR and F370CR Printer and Material Specifications | |
---|---|
System Size/Weight | 1626 x 864 x 711 mm (64 x 34 x 28 in.) 500 lbs ( 227 Kg) |
Build Tray Dimensions
| F190CR: 305 mm x 254 mm x 305 mm (12 x 10 x 12 in.) F370CR: 355 mm x 254 mm x 355 mm (14 x 10 x 14 in.) |
Material Delivery | F190CR: 2 material spool bays, 1 for model, 1 for support located in a drawer on the
front of the unit F370CR: 4 material spool bays, 2 for model, 2 for support located in a drawer on the front of the unit |
Achievable Accuracy | Parts are produced within an accuracy of +/- .200 mm (.008 in), or +/- .002 mm/mm
(.002 in/in), whichever is greater |
Network Connectivity | Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless-ready: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP Encryption:
CCMP, TKIP |
Operator Attendance | Limited attendance for job start and stop required |
Software | F190CR: GrabCAD Print software, MTConnect enabled F370CR: GrabCAD Print and Insight software, MTConnect enabled |
Operating Environment | Operating: Temperature: 15 – 30 ºC (59 – 86 ºF), Humidity: 30 – 70% RH
Storage: Temperature: 0 – 35 ºC (32 – 95 ºF), Humidity: 20 – 90% RH |
Power Requirements | 100-132V/15A or 200–240V/7A. 50/60 Hz |
Regulatory Compliance | CE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach, RCM |
Operating System | Windows 10 (64 bit only) and Window 11 with a minimum of 4GB RAM
(8GB or more recommended) |
Sealed Filament Slots
Traceable Production
Easy To Use
Durable Materials
# | F190CR | F370CR | |
---|---|---|---|
Available material | ABS-M30, ASA, FDM® TPU 92A, ABS-CF10, FDM Nylon-CF10 | ABS-M30, ASA, FDM TPU 92A, ABS-ESD7™, PC-ABS™, Diran™ 410MF07,
ABS-CF10, FDM Nylon-CF10 | |
Build tray dimension | 305 mm x 254 mm x 305 mm (12 x 10 x 12 in.) | 355 mm x 254 mm x 355 mm (14 x 10 x 14 in.)
| |
Material Bays | 2 material spool bays, 1 for model, 1 for support located in a drawer on the
front of the unit | 4 material spool bays, 2 for model, 2 for support located in a drawer on the
front of the unit
| |
Software | GrabCAD Print software, MTConnect enabled | GrabCAD Print and Insight software, MTConnect enabled |