F770 3D Printer
The F770 is designed with size in mind. Print one or several large pieces or take advantage of the printer’s generosity. You can print a 46-inch-long piece with the longest fully heated build chamber on the market.
Description
Technical Features
The F770 is designed with size in mind. Print one or several large parts or take advantage of the printer’s generous
capacity to make multiple parts for maximum productivity.
With the longest fully heated build chamber on the market, you can print a part that is 46 inches long on the
diagonal. The spacious 13 cubic-foot build envelope opens up new opportunities for manufacturing, prototyping and
production-part part applications that aren’t available with smaller printers.
There’s no need to sacrifice on part complexity either. The F770 uses soluble support material, which lets you design
and print your parts free from design-for-manufacturability constraints or the limitations of printers with inferior support
capability. The hands-free support removal process also minimizes post-processing, increasing your productivity.
F770 Printer and Material Specifications | |
---|---|
System Size and Weight | 175 x 124 x 196 cm (69 x 49 x 77 in.)
658 kg (1450 lbs.) |
Build Envelope | 1000 x 610 x 610 mm / 372,000 cm3
(39.4 x 24 x 24 in. / 22,677 in3
)
Maximum length on the diagonal – 1,171 mm (46.1 in.)
|
Materials | ASA – Ivory
ABS-M30™ – Black
SR-30™ soluble support material |
Material Delivery | 200 in3
coil box (3277 cm3 |
Achievable Accuracy | XY part accuracy = +/- 0.254 mm (+/- 0.010 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.),
whichever is greater
Z part accuracy = +/- 0.200 mm (+/- 0.008 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.),
plus 1 layer height |
Software | GrabCAD Print, Insight, Control Center™, MTConnect enabled
U.S. government agency STIG compliance via Stratasys ProtectAM technology is powered
by Red Hat® Enterprise Linux® software. |
Workstation Compatibility | Wired and wireless (with USB dongle) network interfaces using standard TCP/IP protocols
at 100 MBPS minimum |
Wireless Network Connectivity | IEEE 802.11n-2009
IEEE 802.11g-2003
IEEE 802.11b-1999 |
Operating Conditions | Operating temperature 15 °C to 30 °C (59 °F to 86 °F)
Operating Humidity 30-70% – 39 in. clearance on each side of printer |
Audible Noise/Acoustics | 54 dBA
|
Power Requirements | 3 phase, 208V, 30A, 5 wire, 47-63 Hz frequency |
Regulatory Compliance | CE, cTUVus, RCM, EAC, FCC Part B |
Facility Requirements | Double-door width for installation, vacuum pump within system – no shop air required,
forklift uncrating and installation |
Installation Requirements | Crate = 186.7 cm W x 146 cm D x 225.4 cm H (73.5 in. W x 57.5 in. D x 88.75 in. H)
Crated weight = 907 kg (2000 lbs) |
Large Working Area
Large-format printing doesn’t have
to break your budget. The F770 is
designed to make reliable, largescale printing more accessible,
with an affordable price. That’s
possible because not all 3D
printing applications require highperformance materials or all the
capabilities engineered into large,
more expensive printers
F770 3D Printer That Anyone Can Operate
3D printing with the F770 3D printer is simple and does not require special training. It is designed with plug-and-print simplicity so that almost anyone can print large, complex parts quickly and easily.
Print-and-forget dependability
Get accurate print results along with the repeatability and reliability that FDM Technology™ is known for.
Stratasys FDM build chamber design is time-tested, ensuring precise thermal management across the build
platen. This gives you consistent, successful print results, whether parts are big or small.
You can easily control the material density options. Print with full density when you need the strength or use a sparser fill to save material and print time, a valuable option for very large parts. Variable slice height capability also lets you optimize your part’s appearance while minimizing print time.
Intelligent Factory Automation With F770 3D Printer
The F770 3D printer is equipped with MTConnect, ready to connect to your smart factory floor. ProtectAM technology provides data security, which includes US government agency STIG compliance. It does all this on a large-format, easy-to-use platform for the highest value available for 3D printing of large, complex parts.